
CONTACT WITH E-MAIL

-
SLURRY PUMP
-
HAD Slurry Pump
-
WAD Slurry Pump
-
VSD Slurry Pump
-
DGD Slurry Pump
-
OHD Slurry Pump
-
MSD Slurry Pump
-
SSD Slurry Pump
-
VFD Slurry Pump
-
HFD Slurry Pump
-
GPD General Purpose Vertical Pump
-
HSD Heavy Slurry Duty Pump
-
GHD Grease Lubrication High Head Slurry Pump
-
HADPP Heavy Duty Abrasive Slurry Pump In Series
-
CSD Chemical Slurry Pump
-
CFD Cyclone Feeder Duty Pump
-
ASD Slurry Pump
-
CVD Cyclo Vortex Duty Pump
-
-
API610 PUMP
-
API610 OH1(FMD) Petrochemical
-
API610 OH2(CMD) Petrochemical
-
API610 OH3(GDS) Pump
-
API610 OH4(RCD) Pump
-
API610 OH5(CCD) Pump
-
API610 BB1(SHD/DSH) Pump
-
API610 BB2 (DSJH/GSJH)Pump
-
API610 BB3(AMD)Pump
-
API610 BB4(RMD) Pump
-
API610 BB5(DRM)Pump
-
API610 VS1 Pump VTD Model
-
API610 VS4 Pump LYD Model
-
API610 VS5 Pump TCD Model
-
API610 VS6 Pump TDY Model
-
-
MAGNETIC DRIVE PUMP
-
SEWAGE PUMP
-
CLEAN WATER PUMP

TELPHONE:
E-MAIL:
ADDRESS:
No.266 Tianshan Street, Shijiazhuang, Hebei, China
PRODUCTS DETAIL
HADPP Heavy Duty Abrasive Slurry Pump In Series(Repalce AHPP)
Performance range:
Size:4-18inches
Capacity:60-7000m3/h
Head:10-70m
Material:Cr27,Cr28
Seal:packing seal
Design features
.Type HADPP pump are cantilevered,horizontal,centrifugal slurry pumps.They are suitable for delivering low density slurries for metallurgical,mining,coal and building material departments.The shaft seal adopts both gland seal and centrifugal seal.
.Type HADPP pumps operate in high speed with small volumes to save floor area.The frame plates have changeable,wear-resistant metal liners and the impeller are made of wear-resistant metal .
.A large diameter shaft with a short overhang minimizes deflection and vibration.Heavy-duty roller bearings are housed in a removable bearing cartridge.
A minimum number if through bolts hold the pump casing to the frame .A means of impeller adjustment is provided in a convenient position below the bearing housing.
.Split outer casing halves of cast or ductile iron contain the wear liners and provide high operation pressure capabilities.
.The impeller may be either moulded elastomer or hard metal.Deep side sealing vanes relieve seal pressure and minimize recirculation.
Cast-in impeller threads are better suited for slurries.
.Mating faces in hard metal liners are tapered to allow positive alignment during assembly and allow components to be easily removed for replacement.
Hydraulic seal rings give positive sealing between mating faces.
· Designed for a wide range of erosive and/or corrosive applications.
· Used for slurries containing high concentrations of erosive solids or where an extremely robust andheavy duty pump is required.
. All seal options are available of gland or mechanical types and include the flow options.
· Sizes range from 3/2 to 20/18.
· Arange of alternative frames are available to accommodate varying drive power requirements.. Used for multi-stage high pressure (3,450 kPa to 6,890 kPa) operation.
. The centrifugal pump operates by increasing pressure from the inlet (lower pressure) to the outlet(higher pressure).
MESSAGE
CONTACT US
TEL:
+86-311-68058636
EMAIL: info@pumpkingmech.com
ADD.: No.266 Tianshan Street, Shijiazhuang, Hebei, China

Copyright © 2020 Damei Kingmech Pump All Rights Reserved