CONTACT WITH E-MAIL
-
SLURRY PUMP
-
HAD Slurry Pump
-
WAD Slurry Pump
-
VSD Slurry Pump
-
DGD Slurry Pump
-
OHD Slurry Pump
-
MSD Slurry Pump
-
SSD Slurry Pump
-
VFD Slurry Pump
-
HFD Slurry Pump
-
GPD General Purpose Vertical Pump
-
HSD Heavy Slurry Duty Pump
-
GHD Grease Lubrication High Head Slurry Pump
-
HADPP Heavy Duty Abrasive Slurry Pump In Series
-
CSD Chemical Slurry Pump
-
CFD Cyclone Feeder Duty Pump
-
ASD Slurry Pump
-
CVD Cyclo Vortex Duty Pump
-
-
API610 PUMP
-
API610 OH1(FMD) Petrochemical
-
API610 OH2(CMD) Petrochemical
-
API610 OH3(GDS) Pump
-
API610 OH4(RCD) Pump
-
API610 OH5(CCD) Pump
-
API610 BB1(SHD/DSH) Pump
-
API610 BB2 (DSJH/GSJH)Pump
-
API610 BB3(AMD)Pump
-
API610 BB4(RMD) Pump
-
API610 BB5(DRM)Pump
-
API610 VS1 Pump VTD Model
-
API610 VS4 Pump LYD Model
-
API610 VS5 Pump TCD Model
-
API610 VS6 Pump TDY Model
-
-
MAGNETIC DRIVE PUMP
-
SEWAGE PUMP
-
CLEAN WATER PUMP
TELPHONE:
E-MAIL:
ADDRESS:
No.266 Tianshan Street, Shijiazhuang, Hebei, China
PRODUCTS DETAIL
API610 VS4 Pump LYD Model
Head: 5-100m
Capacity: 2-400m3/h
Pump type: Vertical
Media: Water, sewage , chemicals
Material: Carbon steel,chrome steel,stainless steel
LYD pump were developed as single-stage, single-suction, vertical centrifugal pump, with enclosed impeller, pump design and fabrication according to standard GB5656-1994, the shaft was supported with plain bearings in the pump casing and bearing spiders; top bearing is SKF antifriction bearing,lubricated with Li-based grease; The pump is equipped with flexible coupling.
Other details information and operating data see datasheets.
Performance range
Capacity(Q): 2-400m3/h
Head(H):5-100m
Working temperature(T): -20℃ - 120℃
Application
Thermal power plant
Chemical plant
Sewage treatment plant
Refining steel rolling mill
Paper mill
Cement plant
Structure
1.Shaft connected structure is safe and reliable.
2.The rotator parts could be axial adjustment
3.The roator parts adopts multipoint supporting so that the pump operation could be safe and reliable.
4.Sliding bearing adopts self-lubricating or outside lubricating.
5.When start up,the impeller is absolutely immersed in the medium, so the start-up is easy and there is no venting problem.
6.It adopts double volute casing (when the flange size is bigger than 80mm),it makes small radial force for rotator parts and small deflection for shaft. The sliding bearing will have small abrasion and long service life.
7.View from motor side, the pump rotation direction :CW
MESSAGE
CONTACT US
TEL:
+86-311-68058636
EMAIL: info@pumpkingmech.com
ADD.: No.266 Tianshan Street, Shijiazhuang, Hebei, China
Copyright © 2020 Damei Kingmech Pump All Rights Reserved