
CONTACT WITH E-MAIL

-
SLURRY PUMP
-
HAD Slurry Pump
-
WAD Slurry Pump
-
VSD Slurry Pump
-
DGD Slurry Pump
-
OHD Slurry Pump
-
MSD Slurry Pump
-
SSD Slurry Pump
-
VFD Slurry Pump
-
HFD Slurry Pump
-
GPD General Purpose Vertical Pump
-
HSD Heavy Slurry Duty Pump
-
GHD Grease Lubrication High Head Slurry Pump
-
HADPP Heavy Duty Abrasive Slurry Pump In Series
-
CSD Chemical Slurry Pump
-
CFD Cyclone Feeder Duty Pump
-
ASD Slurry Pump
-
CVD Cyclo Vortex Duty Pump
-
-
API610 PUMP
-
API610 OH1(FMD) Petrochemical
-
API610 OH2(CMD) Petrochemical
-
API610 OH3(GDS) Pump
-
API610 OH4(RCD) Pump
-
API610 OH5(CCD) Pump
-
API610 BB1(SHD/DSH) Pump
-
API610 BB2 (DSJH/GSJH)Pump
-
API610 BB3(AMD)Pump
-
API610 BB4(RMD) Pump
-
API610 BB5(DRM)Pump
-
API610 VS1 Pump VTD Model
-
API610 VS4 Pump LYD Model
-
API610 VS5 Pump TCD Model
-
API610 VS6 Pump TDY Model
-
-
MAGNETIC DRIVE PUMP
-
SEWAGE PUMP
-
CLEAN WATER PUMP

TELPHONE:
E-MAIL:
ADDRESS:
No.266 Tianshan Street, Shijiazhuang, Hebei, China
PRODUCTS DETAIL
API610 BB3 Pump
Head: 200-1050m
Capacity: 25-800m3/h
Pump type: Horizontal
Media: Liquid of Petrochemical industry
Material: Cast steel, SS304, SS316, SS316Ti, SS316L, CD4MCU
Performance range:
Size: 1-24 inches
Capacity: 15-4500 m3/h
Head: 10-320m
Temperature: 0-210 °C
Material: Cast steel, SS304, SS316, SS316Ti, SS316L, CD4MCU
API610 BB3 Pump Construction:
1.The casing is axially split with the suction and discharge branches located in the lower half,so it allows the complete pump rotor with bearings to be removed for maintenance without disturbing the main pipework and valves.Short inspection and maintenance times
2.Impeller is symmetrically arranged.Rotor is in hydraulic balance.
3.Double volute casing reduced radial thrust and bearing loads.
4.Large branches.Low flow velocities and high forces and moments accommodated.
5.Sizes of seal champer comply with API682 specification.Seal champer is designed to accommodate all single,tandem,dual and cartridge seal configurations.Cartridge seal is standard type.
6.Replaceable wear beings prevent the main components from being worn out.
7.Generous shaft diameter,small span.Reduce shaft deflection.Increase seals and bearing life.
8.Heavy duty rotor bearings.Special stiffness design makes the bearings run reliably.
9.Flexible spacer membrane coupling.
10.Optional instrumentation to monitor temperature,pressure and ib-ration,etc.
11.Welded common baseplate with drain rim
Applications:
The pumps are suitable for pumping clean liquids or liquids with soe tolerance of slight contamination by solids.They are used for pumping liquids for petrochemical process,for water supply and treatment,as marine ballast and cooling water pumps,in sea water desalination plants,for offshore duties.As well as being used for other similar usefulness.SHS pumps can also be used as energy recovery turbines.
Advantages
1.Wide choice of hydraulic,good NPSHr performance,high efficiency,wide perfect region,power saving and low consumption.
2.Reliability:Every products is well checked before shipment.
3.Manufacture:excellent equipment,high-class staff,top-ranking products.
4.Service:rapid service,lifetime maintenance.
MESSAGE
CONTACT US
TEL:
+86-311-68058636
EMAIL: info@pumpkingmech.com
ADD.: No.266 Tianshan Street, Shijiazhuang, Hebei, China

Copyright © 2020 Damei Kingmech Pump All Rights Reserved